IPEC specializes in turnkey field industrial pipe and steel process system construction. Our capabilities include the fabrication and installation of process and utility industrial pipes, certified welding and equipment setting.

Our team of piping specialists provide solutions for your process challenges.

• ASME B31.1 Power Piping
• ASME B31.3 Process Piping
• API 1104 Pipe Fabrication
• Skid Mounted Systems
• Engineered Pipe Supports
• Double Wall Pipe
• High-Purity Gas and Water Systems
• Field Installation
• Orbital Welding
• Passivation

Our fabricators and installers are highly skilled, trained and experienced. They are qualified to industry requirements and certified weld procedures. We have a full-time QA/QC team to check quality and for accurate dimensions.

IPEC has over 25 years of experience handling complex piping fabrication and installation for industrial applications like Oil &Gas , Petrochemical , Chemical, Energy & Power , Pharmaceutical and Food Processing.

Specifications

1) Pipe Installation
IPEC is capable of installing threaded (THR), socket weld (SW), butt-weld (BW), soldered end (SE), flanged (FLG), slip on glued (SOG), mechanical joint (MJ), fusion both socket and butt, grooved, and hydraulic coupling connection piping. IPEC has certified welders (API, ASME B31.1 & B31.3, and City of LA). Our highly qualified pipefitters and welders make the codes requirement applicable and possible.

2) Pipe Routing Design and Implementation
IPEC creates both in field and office isometric (ISO) drawings prior to fabrication and installation of piping. The Bottom of Pipe (BOP) elevation and Face of Flange (FOF) dimensions are established prior to hanging the pipe. Expansion loop and valve access are identified prior to pipe installation. Instrumentation locations are summarized to ease client needs. Insulation and accessibility and thickness are in consideration.

3) Pipe Support Design and Installation
IPEC will analyze the need of pipe support, pipe bridge, and pipe rack. Since the existing pipe support may not be strong enough, IPEC will study and design the revised pipe support system.

4) Selection of Valves both Manual and Control
IPEC assists the client and recommends usage of certain manual or control valves and will install the valves. A large selection of manual valves are available, here are a few to name, Ball valves, Butterfly valves, Check valves, Diaphragm valves, Gate valves, Globe valves, Knife Gate valves, Needle valves, Pinch valves, and Plug valves. IPEC install all type of control valves, to name a few, Actuators valves, Backflow Prevention valves, Back-Pressure Relief valves, Condensate Drain valves, Diverting valves, Float valves, Hydraulic Cylinder valves, Metering valves, Mixing valves, Pneumatic Control valves, Pneumatic Solenoid valves, Pressure Regulating valves, Pressure Relief valves, Release valves, Relief valves, Safety Relief valves, Solenoid valves, Temperature Control valves, and Three way valves.

5) P&ID Development and Implementation
Piping & Instrumentation Drawing (P&ID), also known as Process & Instrumentation Drawing (P&ID), is one of IPEC specialties! IPEC can create a P&ID or revise a P&ID for implementation for our clientIPEC can create pipe routing and install the piping from P&ID as required by clients. Piping layout, routing, creating, revision, and installation of all process piping are specialties ofIPEC. IPEC , and its valued subcontractors can perform quality Electrical & Control (E&C) works as per project requirement. The design and built of programmable logic controllers (PLC) and Control Panel are performed.

6) Pipe Testing
It is essential to test the piping systems after fabrication and before operation. IPEC has developed methods to do various pressurized and vacuumed tests. All pipe testing are non-destructive.

7) Pipe Painting and Labeling
While pipe installation, routing, and support are some of IPEC’s specialties, pipe painting and labeling are essential to safe operation and usage of process piping. Our in-house painting crews are knowledgeable on paint property and application. Our pipefitters are very precise on correct labeling of process piping.

8) Pipe Insulation and Heat Tracing
IPEC and its valued subcontractors can perform quality heat tracing (both steam and electrical) and insulation of all requirements.

9) Pipe Material

• Aluminum (AL)
• Carbon Steel (CS)
• Carbon Steel Rubber Lined (CSRL)
• Carpenter 20 (C-20)
• Copper (CU)
• Chlorinated Polyvinyl Chloride (CPVC)
• Fiberglass (FRP)
• High Density Polyethylene Pipe (HDPE)
• Monel Pipe
• Polytetrafluoroethylene Pipe (PTFE)
• Polyvinylidene Fluoride Pipe (PVDF)
• Polyvinyl Chloride Pipe (PVC)
• Stainless Steel Pipe both 304 and 316 (304 SS) (316SS)

10) Connection Type

• Butt Weld (BW)
• Socket Weld (SW) Threaded (THR)
• Soldered End (SE)
• Flanged (FLG)
• Slip on Glued (SOG)
• Mechanical Joint (MJ)
• Fusion both socket and butt
• Grooved
• Hydraulic Coupling

11) Manual Valves Type

• Ball valves
• Butterfly valves
• Check valves
• Diaphragm valves
• Gate valves
• Globe valves
• Knife Gate valves
• Needle valves
• Pinch valves
• Plug valves

12) Control Valves

• Actuators valves
• Backflow Prevention valves
• Back-Pressure Relief valves
• Condensate Drain valves
• Diverting valves
• Float valves
• Hydraulic Cylinder valves
• Metering valves
• Mixing valves
• Pneumatic Control valves
• Pneumatic Solenoid valves
• Pressure Regulating valves
• Pressure Relief valves
• Release valves
• Relief valves
• Safety Relief valves
• Solenoid valves
• Temperature Control valves
• Three way valves

13) Welder Certification

• API
• ASME B31.1
• ASME B31.3
• Turkey Welding Certification

14) Projects

• Airport jet fuel piping
• Aerospace facilities
• Asphalt plants
• Battery factories
• Beverage plants, dairies, and drinking water plants
• Chemical plants
• Copper sheet plants
• Cryogenic plants
• Electronic microchip and other semi-conductor plants
• Foam plant
• Food processing facilities
• Fossil, natural gas, geothermal and co-generation
• Power station
• Gold mines
• Insulation plants
• Lime, cement, Boron, concrete block plants
• Paper plants
• Personal care products plant
• Pharmaceutical plant
• Refineries
• Smelters
• Titanium plant
• Tire plants
• Wastewater treatment plants